.:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2672773
Anycubic I3 Mega TPU Mod  by ml_blh is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Mod for TPU printing with the Anycubic I3 Mega.

The hole for the bowden ist bigger than the original mod.

Update2:

I changed the mod a little bit, so that the top ist more between the two wheels. 
The difference between the two versions ist the size of the hole.

v1: Holediamter 2,0mm (for Saintsmart TPU 1,75mm, but Filmanet is ca. 1,65mm)

v2: Holediameter 2,2mm (for other Flex/TPU Filament)

I know that the default diameter of filament is 1,75mm, but with a 0,4mm nozzle its not exact printable. The easiest way is to print both version an try in wich one the filament fit preferably.


Update1:

I used the mod also when i print PLA and ABS, but after some time there was a squeaking at the extruder. So i changed back to the original one and use the mod only when i want to print TPU.

# Print Settings

Printer: Anycubic I3 Mega
Rafts: No
Supports: No
Resolution: 0,2 mm
Infill: 20%