Org2Blog

/images/logo-color-multi.png

About

Blog from Org mode to WordPress.

Table of Contents

- About

- Table of Contents

- Requirements And Compatibility

- Installation

- Using A Package

- Use-Package

- Install The Package Yourself

- Build The Package Yourself

- Setting Up The Source Code By Hand

- Usage

- Make Your First Post In Less 5 Minutes

- The 6 Most Important Next Steps

- Helping Yourself To The Basics

- Writing More After You Have “Settled Into” The Software

- Just Writing

- Your Second Buffer Post

- Your First Buffer Page

- Automatically Configuring Your Environment

- Defining Custom Keybindings

- Logging In Faster

- Store Multiple Entries In One File

- Using Subtrees

- Using Narrowing

- Automatic Image Uploading

- How It Works

- Supported Properties

- Tying It All Together

- More Functionality

- Global And Blog Specific Configuration

- Inserting Things

- Confirming Things

- HTML Support

- Posting Exactly What You Wrote (Quoting HTML)

- Source Blocks

- Plain Source Box Format

- SyntaxHighlighter Evolved

- SyntaxHighlighter Evolved Is Broken Now What?!

- LaTeX Support

- WordPress LaTeX

- MathJax

- Migrating Org Mode Files To Org2Blog Files

- Export WordPress to Org

- Using Entry Templates

- Tracking Entries

- Doing Things After Saving And Publishing

- The Huge Power Of Customizations

- Some Questions And Some Answers

- Why Does Org2Blog Talk About Save, View, Publish, And Trash So Much?

- Why Does Org2blog Talk About Buffers, Subtrees, Posts, And Pages So Much?

- Why Isn’t The Package Name Org2Wordpress?

- What Is MetaWeblog And Why Is It In Org2Blog?

- Why does Org2Blog Use Both The XML-RPC MetaWeblog and WordPress API

- Sample Posts

- Buffer Post

- Subtree Post

- Changelog

- Credits

- When Things Go Wrong Or Could Go Even Better

- When Things Go Wrong

- When Things Could Go Even Better

- Development

- License

Requirements And Compatibility

Org2Blog runs against the version of Org mode that comes pre-loaded with Emacs. Org2Blog will require a relatively recent version of Emacs simply to keep it up to date with Org mode.

Org2Blog requires at least Emacs 26.3 and Org mode 9.1.9.

That is the minimum version required and will probably work fine with most newer versions too.

Installation

Using A Package

The easiest way to install Org2Blog is using a package.

You can use either a stable or cutting-edge version of Org2Blog by configuring your packaging system.

If you want the stable version then use MELPA Stable

(add-to-list 'package-archives

'("melpa-stable" . "https://stable.melpa.org/packages/") t)

If you want the cutting edge version using MELPA

(add-to-list 'package-archives

'("melpa" . "https://melpa.org/packages/") t)

For advanced users you can configure Package to use any combination of stable and cutting-edge versions of a package and its dependencies. Read more about how to configure it and utilize that power in both your init file and the Package user interface.

Use-Package

Use-Package brings ease and order to your init file. It manages your packages in a predictable and simple way. It is the easiest way to use Org2Blog because it will download Org2Blog for you along with all of its dependencies. Before using it, configure MELPA. MELPA contains the development branch of Org2Blog so you’ll get the most current version right when it becomes available. Here is how to load Org2Blog:

(use-package org2blog

:ensure t)

Take some time to read more about Use-Package. You can use as little or as much as you find helpful: it accommodates just about any Init style you can throw at it.

Install The Package Yourself

You can do what Use-Package does yourself. Just download the Org2Blog’s package (it is a tar file) and install it using package-install-file. Load it by adding (require 'org2blog) to your init file.

Build The Package Yourself

MELPA creates Org2Blog’s package using this recipe.

The easiest way for you to build the package is to download MELPA and run it locally to build Org2Blog on your computer:

- Clone the MELPA repo

- Read about how to build a recipe

- Make sure that you are using the correct Emacs version (see requirements above) either in your path or editing the recipe

- Open the Org2Recipe and build it

Setting Up The Source Code By Hand

If you are a developer or even just feel like exploring the code a little for the first time then Org2Blog is a great place to start. Even better: you’ve already got everything you need. Specifically, Emacs, and all of the code required to run Org2Blog, are already running and ready for you to dig into it. Simply find a function you want to study, position the cursor on it, type C-h f, choose that function name, and hit enter. Now you will see a link for the source code. Position the cursor there and hit enter and you are ready to study. You can make changes here, run them, and see how things work. All of the code has already been installed automatically by the package manager so you don’t need to do anything else: just dig into the code. This is the easiest way to get started with the source code. If you want to do more then you can run Org2Blog and it’s supporting packages by downloading their source loading them yourself. Doing so will get you familiar with things like library versions, the load-path, Elisp, and Git.

Org2Blog’s dependencies are defined in org2blog-def.el. To get you started quickly there are two helper functions here:

- org2blog-def-checkout-statement creates Git commands to get the code from GitHub into the directory you want it stored. Call it and input the directory name. Copy and paste the commands from *Messages* into your Terminal to run them.

- org2blog-def-load-statement creates Elisp code to load the libraries. Call it and input the directory name. Copy them into your Init file then run them. Now they will get loaded each time your start Emacs.

For example you should see something like this:

git clone https://github.com/hniksic/emacs-htmlize.git /Users/gcr/mysrc/htmlize

And this

(add-to-list 'load-path "/Users/gcr/mysrc/htmlize")

Now you’ve got everything you need to run Org2Blog against its source code. With this set up you can start playing around with things and even making changes. When you scratch and itch, create your branch, and submit a pull request. It’s pretty fun and very easy.

Usage

Note: For a better learning experience try reading this document inside of Emacs and Org mode by calling org2blog-readme.

Make Your First Post In Less 5 Minutes

Blogging is fun. Org2Blog makes blogging with WordPress even more fun because it makes it simple. Simplicity is one of Org2Blog’s greatest strengths. That means you spend more time blogging and less time fiddling around with stuff. Having fun is why you are doing this, right? Exactly. Before digging into all of the powerful things that you can do with Org2Blog, make your first blog post. To do that, it is copy-and-paste time. Don’t worry, you’ll dig into all the other cool features soon! You can easily make your first post in less than 5 minutes from now because the configuration file and UI make it so simple

- Installation is already complete so Org2Blog is ready for you to use.

- Create the profile for your blog so you can get started. In this example “myblog” is the name of your profile for your blog: it stores everything you want Org2Blog to use and know about it. To get started it only requires the 2 bits of information shown. url is the full URL required to access WordPress XML-RPC on your blog. username is the account that you are using to blog with. This is all it takes. Now fill it out and evaluate it.

(setq org2blog/wp-blog-alist

'(("myblog"

:url "https://myblog.com/xmlrpc.php"

:username "username")))

- Display the Org2Blog user-interface (UI) by executing the command org2blog-user-interface. You can do literally everything with Org2Blog using it’s UI (setting keybindings elsewhere is super easy too and you’ll cover it soon). For simplicity these directions will refer to “things to do in the UI” in the style of UI [action].

- The Main Menu:

/images/menu-main.png

- Create a brand new entry from a template: UI [New Buffer]

- If you aren’t logged in then Org2Blog will ask if you would like to. Yes

you should go ahead and log in.

- A pre-populated buffer post sits in front of you. Fill it out with test data for with title, category, and tags. Org mode requires you to keep a space in between the keyword and the value: that is the only way that it can read them. If you accidentally omit the space then Org2Blog will report it to you and suggest a resolution.

- Save it as a post draft on the blog: UI [Save Post Draft]

- Watch for messages in the minibuffer letting you know what is happening.

- #+POSTID is populated now.

- View it: UI [View Post]

- When you are ready to post it, do it: UI [Publish Post]

Congratulations! You just made your first blog post with Org2Blog! With this experience under your belt you will be a lot more interested about how to get the most out of Org2Blog. It is simple and powerful, and you can shape it into the perfect blogging tool for you. Work through usage sections at your own pace. Take the time to invest in Org2Blog and your personal blogging workflow. It is not a race, it is a pleasant walk: so take your time and have fun!

P.S. If you are interested here are some other examples of the UI

The Help Menu–Just Hit “h”:

/images/HelpMenu.gif

The “Insert Things” Menu”:

/images/InsertThingsMenu.png

Category Completion:

/images/CategoryCompletion.png

Readme:

/images/ReadmeBuffer.png

Customizations Documentation Menu:

/images/VariableMenu.png

The 6 Most Important Next Steps

The example at the start of this document is meant to be just that: an example. It only covers a fraction of what is possible for writing and publishing with Org2Blog. This headline covers a few things that really fill in the gaps for how to do more and better blogging with Org2Blog.

Every Org2Blogger is unique, of course. However, they all know Emacs and Org mode. The concepts and features are in place (in varying degrees) are a common ground. Consequently the bulk of the feedback about Org2Blog had a lot in common too. The following items are the top 5 things that pretty much everybody wanted to know how to do

Helping Yourself To The Basics

Org2Blog’s goal is to keep blogging fun. It strives make hard things easy and easy things easier. So in that spirit everything you want to do can be done via the menu. Start the menu calling org2blog-user-interface.

The easiest way to get started with the basics is to play around with the menu. If for you that means reading then start with:

- UI [About]: A light introduction to Org2Blog platform

- UI [README]: A copy of this entire README.org in a writable buffer. This is a nice way to make your own notes in-place without making changes to the original. Just save your changes to your own file and then you’ll have them ready for the next time you are blogging.

Once you’ve successfully logged in and read a little bit about Org2Blog then you’ll notice that you get started blogging very quickly. The menu items below are phrased generically, just choose the correct kind for your entry based on the source (buffer or subtree) and whether its destination is post or a page. Here is the workflow:

- UI [Login]:

- UI [New Buffer] or UI [New Subtree]:

- UI [Save It]:

- UI [View It]:

- UI [Publish It]:

- Make changes as you iterate over the entry

- UI [Save It]:

- UI [View It]:

- UI [Publish It]:

That workflow is 100% of blogging. The right 50% of the menu is dedicated to that alone! For each action you just need to tell Org2Blog whether you are doing it from (the source) a Buffer Entry or a Subtree Entry and whether or not it is a (destination) post or a page. With that simplicity in mind, please read on to learn about the options for learning more.

Another way to play around with it is to try out all of the menu items. Don’t worry though because it is really, really safe. Org2Blog never deletes anything on your computer. It will of course delete blog entries on the server, but never the source documents. What each menu item does, too, is pretty obvious by the name. If you want to read its documentation then hit h, its key command will turn red, hit it, and its documentation will come up. They are probably overly detailed, but, it is usually better to over-specify. If your preferred style of playing involves reading, running, and configuring things though then Org2Blog comes with a rich approach built right in.

Start by calling Customize and search for org2blog. Take a quick look at what is available. You might customize a bunch of things right away, or nothing at all. The important thing right now is to have at-least seen them once so they get stored in the back of your mind. One of the best things about customize is that you can configure variables right along with their definition. That tight integration of system and documentation make the whole thing easier to use and understand.

You have probably noticed by now, there aren’t a ton of function names listed in this documented. That is by design. Org2Blog has a lot of functions and a lot of configuration options. So many that it would overwhelm a lot of us. On top of that, the document would probably get either wrong or just out of date pretty quickly. However, you do need to know the details at some point, so, what is the happy medium? It is simple: let Org2Blog teach you everything that you want to know exactly when you want to know it.

One of the selling posts about Emacs Lisp computer programs is that not only do they come with the Libre Software source code but they also include all of the documentation in-place. It means that you can ask Emacs to give you the documentation for whatever you want. This is a fine, powerful, and good solution. It is the best for programmers. For bloggers though, it can be a little overwhelming a place to start. Org2Blog does its best to bridge the gap between the two by providing documentation for functions and variables directly from the menu. If you are the kind of person who just jumps right in and wants to see everything right at once, then UI [Values] is where you want to start. Otherwise access them using Customize just like normal.

This combination of easy to use menus and direct access to the code is the best way to get started. Find something that looks interesting, read about it, do it, or both, then more. Whatever keeps you having the most fun is the right way to do it.

Writing More After You Have “Settled Into” The Software

Just Writing

Your Second Buffer Post

Perhaps you know some defaults you want for every kind of entry. When you are ready configure them see these variables and functions:

- Buffer Entry

- org2blog/wp-buffer-template

- org2blog/wp-buffer-format-function

- org2blog/wp-default-title

- org2blog/wp-default-categories

- org2blog/wp-default-tags

- Subtree Entry

- org2blog/wp-buffer-subtree-template

- org2blog/wp-buffer-subtree-format-function

- org2blog/wp-default-title-subtree

- org2blog/wp-default-categories-subtree

- org2blog/wp-default-tags-subtree

With your configuration ready, start creating the post.

Start by creating a UI [New Buffer]. A template is used to populate your entry. When you UI [Login] Org2Blog learns about your Categories, Tags, and Pages. Position the cursor on one of those lines and UI [Complete] to either choose a value or complete a value that you began typing. If you want one you can add a #+DESCRIPTION and a #+PERMALINK too.

Org2Blog includes some helpers for inserting content into your entry under the UI [“Insert A”] menu:

- UI [More Tag]: The WordPress “Read More” tag. Org2Blog will ask if you want

to use a message inside of it, too.

- UI [MathJax Shortcode]: If you want to use MathJax, this lets you do it.

- UI [“LaTeX” Name]: Prove that MathJax is working.

- UI [Link To Post]: Insert a link to a post from a list of posts on your blog.

- UI [Link To Page]: Insert a link to a page from a list of posts on your blog.

- UI [#+ORG2BLOG]: If your entry doesn’t have the special tag, then it will insert it.

When you are ready save your new post. Open the main menu by calling org2blog-user-interface. Since you just created a buffer entry look at the menu items under the Buffers column and find the operation that you want to perform. Your first step here is UI [Save Post Draft]. This Saves your post on your blog. The language here is important: everything you do using the menu is phrased how you will be working on the blog itself and the actions you would be performing there. Next do UI [View Post] to bring up a web browser so you can read and review your post. From here you can iterate through your writing process until you finally UI [Publish Post].

Your First Buffer Page

Working with pages is virtually identical to working with posts for a good reason: WordPress sees them as nearly the same thing and Org2Blog does too. The only difference is in one place: when you work with your page use the functions that have Page in the name.

In the walk-through here that means using UI [Save Page Draft] and so on.

Automatically Configuring Your Environment

You can customize your writing experience by configuring Org2Blog whenever it opens up an Org2Blog file. You do that using org2blog-mode-hook.

Since Org2Blog documents are plain Org documents, Org2Blog can’t tell the difference between them just by looking at them. It needs a hint. The hint is simple: Org2Blog looks for a buffer property named #+ORG2BLOG and if it finds it then it loads its minor mode. To make this happen set it up in the Org mode hook:

(add-hook 'org-mode-hook #'org2blog-maybe-start)

Defining Custom Keybindings

In addition to using the menu, you might enjoy some personal keybindings for Org2Blog functions. Here is an example:

Here is how to identify the functions behind the User Interface that you can bind to keys:

/images/HelpMenu.gif

This sample uses the alt name-space because it is supposed to be 100% free for user key bindings.

(defun org2blog-sample-keybindings ()

(local-set-key (kbd "A-0") #'org2blog-user-interface)

(local-set-key (kbd "A-9") #'org2blog-complete))

(add-hook 'org2blog/wp-mode-hook #'org2blog-sample-keybindings)

Logging In Faster

Org2Blog can automatically log you in if you configure a .netrc file in your home directory.

Your configuration should look like this

machine ⟪myblog⟫ login ⟪myusername⟫ password ⟪myrealpassword⟫

or like this

machine ⟪myblog⟫

login ⟪myusername⟫

password ⟪myrealpassword⟫

Whatever format you use: first replace the contents of the double angle brackets with the actual values, and finally remove the double brackets themselves.

Then, configure your blog using those credentials, as shown below.

(require 'auth-source)

(let* ((credentials (auth-source-user-and-password "⟪myblog⟫"))

(username (nth 0 credentials))

(password (nth 1 credentials))

(config `("wordpress"

:url "http://username.server.com/xmlrpc.php"

:username ,username

:password ,password)))

(setq org2blog/wp-blog-alist config))

Store Multiple Entries In One File

Using Subtrees

Subtrees are a great way to keep multiple posts in one file. One way people use this it create a single file for a week or a month and store all entries there. Others for example take notes on a chapter of or an entire book and store them in a single place. Just like a plain old Org mode document: subtrees do what they do well.

Power users take note: you can store subtrees that post to different blogs by specifying the URL on the subtree. This “just works” like any other subtree post. Not something you might need much but when you do it is a very cool feature.

The workflow for creating a subtree entry is virtually identical to a buffer entry. There are only two (but very important) differences:

- Use UI [New Subtree] to get started.

- Review the properties

- They go in a drawer like any other subtree.

- The headlines is used for TITLE unless you set an option for it

- Unlike a buffer entry: Tags are stored in POST_TAGS. Org mode already uses

TAGS as a fundamental concept for subtrees so we had to choose a different property name. POST_TAGS seemed pretty good.

If you ever have your cursor in a subtree, any subtree, and you attempt to use a buffer function, Org2Blog will not perform the actions and give you a warning. This is to prevent unpleasant situations.

You can either save your subtree entry in a file, or copy and paste it into an existing file.

Using Narrowing

Having already read through the manual and posted a buffer entry, you are probably starting to get comfortable with how they look. Basically, an entry has some configuration data at the top of the page, followed by the title, and then the content. It is what you’ll be seeing time and time again. As you write more, you will probably start to wonder, “Why can’t I just store multiple buffer entries in a single buffer in the first place?! (And if you hadn’t already, then you will definitely be wondering after you read the section on using Subtrees to store multiple entries!)” That is an excellent question.

The first reason is that it is easier to make sense of your entry types when their home is clearly defined: every single buffer entry is stored in a separate file, and multiple subtree entries are stored in a single file. For most users, this is a straightforward approach that handles the majority of workflows that Org2Bloggers will ever require. Whether or not this workflow serves you, you may still be left wondering what exactly is the difference between a buffer entry and a subtree entry.

Buffer entries and subtrees are identical in purpose. You write, save, view, publish, and trash them. The only difference between them is their technical format. As you may have seen, buffer entries specify post configuration properties up at the top of the page, and subtree entries specify them just below the subtree. Now to come all the way back around, you might be asking, “Well, if they are identical, then why can’t I store multiple buffer entries in a single file?” The answer is that yes, you can.

You can store multiple buffer entries in a single file. You write, save, view, publish, and trash them precisely as you would expect. It all “just works,” that is if you are willing to get a little more technical about using Emacs by learning something about Narrowing.

Narrowing means focusing in on some portion of the buffer, making the rest temporarily inaccessible. The portion which you can still get to is called the accessible portion. Canceling the narrowing, which makes the entire buffer once again accessible, is called widening. The bounds of narrowing in effect in a buffer are called the buffer’s restriction.

Narrowing can make it easier to concentrate on a single subroutine or paragraph by eliminating clutter. It can also be used to limit the range of operation of a replace command or repeating keyboard macro.

– 14.5 Narrowing, from the The Emacs Editor Documentation

When you tell Org2Blog to act upon a single Buffer entry, say [Save Post Draft], then Org2Blog needs to think that it is looking at a single Buffer entry. This is easy to do when there is only one Buffer entry because there is only one buffer entry. How do you make Org2Blog think that there is only one Buffer entry when you start storing multiple Buffer entries a single file, though? The answer is that you do it by merely using Narrowing.

Please read its definition two or three times until you feel good about it. It is a simple idea, but it can take time for it to sink in. Once you start using it, though, you will find it to be a powerful tool useful for many situations that you deal with as a writer of any kind. Here is how to use it to store multiple Buffer entries in a single file:

- Create the file blog.org in which to store multiple Buffer entries.

- Create a Buffer entry, as usual, using the UI

- Instead of saving it, copy and paste it into blog.org

- Give it a notable title and some content.

- Do the same thing for another buffer entry. Now you have two in blog.org.

- It should look something like this:

/images/Narrowing01.png

Now you are all set to start working multiple Buffer entries in a single file. You’ll go through the process of narrowing down to a single entry and working on it just as you’ve already done before. Here are the steps:

- Identify the second Buffer entry you just created. You will work on this from here on.

- Highlight everything from the start of the entry to the end of the entry. You can do this using your mouse by positioning the pointer at the top of the post, pressing and holding the mouse button, then releasing it. Another way to do it is to move the cursor up to that position, press Control-space, then move the cursor to the end.

- Narrow to the selected region by pressing Control-x n n. That means pushing and holding Control-x, releasing it, then striking n once, and then finally once again.

- If you did it right then, you would only see the second Buffer entry. You have just narrowed down to the region you selected: the entire Buffer entry.

- From here, you can work with your entry exactly as you did before.

- It should look something like this:

/images/Narrowing.gif

As you can see, storing multiple Buffer entries in a single file is pretty compelling in theory. In practice, though, it can result in some confusion when you are in the flow of writing, and suddenly, the rest of your file is missing. On the other hand, when you become more adept and working with the Emacs editor, you will find that Narrowing is one of the power tools that you can’t live without.

If you read this far, then using Narrowing to manage multiple Buffer entries might be the right thing for you. Either way, I’m you know now that this is an option. If this is your introduction to Narrowing then I hope that you enjoy its use and have the chance to play around with where it happens to fit into your workflow with Org2Blog or any of the problems you solve using Emacs!

Automatic Image Uploading

WordPress does a great job helping you manage image files using its Media Library. The Media Library User Interface is simple and powerful. Whether you post photos once in a while or you are posting daily running a Photoblog the Media Library integrates nicely with both of and most of the most common blogging workflows. After blogging for a while and developing the beginnings of a personal workflow it is a good time to start considering where Org2Blog can assist you working with image files in your Media Library.

Org2Blog can help you do one thing here: automatically upload images to your media library for you. The way it works is that when you publish your post to your blog Org2Blog:

- Scans your Org2Blog entry.

- Finds a link to an image file on your computer.

- Uploads the file to your Media Library.

- On publishing

- Modifies the link so it points to the uploaded file on your blog.

- Configures the size of the IMG linked.

- Inserts the new link in the post.

- Make a note in the Org2Blog entry so that it remembers that it already uploaded the image file to your blog.

This is good for the following workflows:

- “I Never Want To Touch The Media Library User Interface”

- “But When I Do I Can Make It And The Entry Consistent”

- “I Rarely Post Images And When I Do They Are All On My Blog”

- This features make every image link point to your blog

- “I’m Very Familiar And Comfortable With HTML, Org mode, And WordPress”

In other words this workflow is very powerful, simple, and useful to a very certain skilled and curious kind of user. It might not be for most of you, but if it is then you will really like it.

By default this feature is disabled. If after reading this you find that you are that kind of user or even just curious about how it works then you can enable the feature by setting org2blog/wp-image-upload to a non-nil value like this

(setq org2blog/wp-image-upload t)

and read more about how it works.

How It Works

Org mode’s HTML exporter is smart about Image links. When it finds images in an Org link like this file: or even a link like this [[example.png]] it knows to generate an IMG tag in the resulting HTML. All of the file types listed in org-html-inline-image-rules are automatically supported. They work in Org2Blog exactly the same as in Org mode: Org2Blog uses the Org mode HTML exporter to do all of its work which means that everything is going to work as you expect it.

All of the standard HTML image attributes work by prefacing the image link with a #+ATTR_HTML like and following it with the desired attribute including for example:

:alt

My alt def

:width

:height

:style

border:2px solid black;

:style

float:left;

Just like most exporters you can also caption the image with a line like this:

#+CAPTION: My image caption

These two capabilities will get you very close to your desired image styling. The last thing to configure is how to handle image thumbnails.

Org2Blog will insert image thumbnails for all of the image files that you upload to your server. If you want to use this feature first enable it by setting org2blog/wp-image-thumbnails to a non-nil value. Then choose a thumbnail size by configuring org2blog/wp-image-thumbnail-size. Now after uploading your image files the inserted link will include a thumbnail preview of your image file.

Now that you have things configured here is how to move forward with your post.

Create your post exactly as you would expect. Use Image links where you need them. It might look something like this:

[[file:testimage1.png]]

[[./testimage2.png]]

Post your entry. Your image files are uploaded to your blog. A note is stored so that Org2Blog remembers that it already uploaded those image files.

[[file:testimage1.png]]

[[./testimage2.png]]

# testimage1.png https://www.wisdomandwonder.com/wp-content/uploads/2019/03/testimage1-1.png

# testimage2.png https://www.wisdomandwonder.com/wp-content/uploads/2019/03/testimage2-1.png

Because Org2Blog is completely disconnected from the Media Library it is up to you now to keep them synchronized. Here is a list of things you are required to manage and synchronize manually:

- When you delete images

- locally you need to delete them in your Media Library.

- remotely you need to remove them from your Entry.

- When you modify images

- locally you need to remove the upload note so that they will get re-uploaded to your blog.

Once you are comfortable with the Org2Blog lifecycle with WordPress it becomes second nature to manage this manually. The first few times you need to manage this it will be surprising not to see your changes posted it will come to your mind quickly how to address it.

This is how Automatic Image Uploading works.

Supported Properties

The best way to think about how Org2Blog defines entry properties is to first think what a WordPress entry’s metadata. For example there are posts and posts can have parents. Each have a numerical identifier so when you work with them in your Org2Blog file you’ll deal with the same thing. A permalink too is exactly what you would expect. If you haven’t looked at post metadata before then open up a post and click around to see what data it uses.

Next think about how Org mode metadata can supplement your WordPress data. For example Subtrees can have a bunch of different date types. Each one of them will work as the date value for the entry on WordPress.

Since they are plain old Org mode properties: be sure to keep a space between the property name and its value.

- Entry

- DATE

- TITLE

- CATEGORY

- TAGS

- POSTID

- PARENT

- PERMALINK

- DESCRIPTION (aka excerpt)

- Subtree

- For Date

- POST_DATE

- SCHEDULEDD

- DEADLINE

- TIMESTAMP_IA

- TIMESTAMP

- TITLE

- CATEGORY

- POST_TAGS

- Though they are the same thing, due to technical reasons when tags appear under a Subtree they can’t use the TAGS property like an Entry, they use POST_TAGS instead. Please take note of this when you convert an Entry post to a Subtree post.

- POSTID

- PARENT

- PERMALINK

- DESCRIPTION (aka excerpt)

Tying It All Together

After playing around a little bit you should have a better sense of what is possible. The following are some key points that will tie everything together:

- Org2Blog’s fundamental approach to configuration simple. When you configure a feature using a variable then every blog profile will use that value. That makes it convenient because you are likely to use the same settings on each blog. Think of it as a global configuration, every blog profile will use it. Sometimes you want to configure things uniquely for each blog. For example you maybe you have a conservative workflow on your work blog, but are more easy going on your personal so your “confirm before doing things” will be totally different. Additionally the default categories and tags would be probably be very different too. See org2blog/wp-blog-alist for details.

- You only have to UI [Login] when you want to save or publish your post. However, you won’t have code completion for your Categories, Tags, or Parent pages until you do login. Org2Blog will ask you which blog to log into. If there is only one, then it won’t ask. If there are none then it will warn you.

- You only have to UI [Logout] if you are going to start blogging to a different server than you began. All it does is clear out the local variables used to store tags and categories from your blog.

- When you UI [Save] an already published entry then WordPress will change that entry into a Draft. This is normal WordPress behavior that you may have seen after working with the WordPress UI. If you have never used the WordPress UI before, now is the time. Sometimes using Org2Blog without any WordPress familiarity results in surprises when you forget to either publish or trash your draft and now there is a mysterious draft just sitting out there.

- Whenever Org2Blog can’t do what you asked, and it understands why, then it will show you a message in the minibuffer and the Messages buffer. If it doesn’t understand why then it gives you a warning in the minibuffer and also in the Warnings buffer. You’ll find details there that can both help give you additional information to figure out what happened and resolve it yourself or to copy and paste and fill out an issue report on the issue tracker. Be sure to post issues before you start to get upset. It is probably something we have all faced before and talking about it will usually get it resolved pretty quickly.

- You can store a single entry in a file (a Buffer Post). You can store multiple entries in a Subtree Post. See more below.

- Custom Key Bindings: When you use the menu you will quickly find that you use 20% or the commands 80% of the time. For example you may only ever use buffer posts and never us any other menu item than UI [Publish Post]: in that case you only ever need to call one function! The menu item(s) to do what you want most of the time will quickly become “muscle memory”. At that point it is will be easy for you to configure your own custom keybindings for the functions that back up the menu item. To find the function for the menu item just open the menu, choose UI [Help], select the menu item, and you will be presented with the function that does the actual work. Take that function name and bind it to a key within this mode. See sample-keybindings at the beginning of this document for an example how.

- Here is a screenshot of the Help menu–Just Hit “h”:

/images/HelpMenu.gif

- See org2blog-mode-map or org2blog/wp-keymap-prefix for details of the default keymap and prefix key.

- You may find it just as easy to find a convenient key binding org2blog-user-interface and use that instead.

More Functionality

Org2Blog also helps you do many more good things. See below.

Global And Blog Specific Configuration

See org2blog/wp-blog-alist to learn about how to configure any number of your blogs. You’ve already seen example of the configure this value and the documentation goes into more detail.

There are two ways of configuring features: global and blog specific.

If you know that you want a feature configured the same way for every blog in your configuration then you should configure the global value. For example if you want to always be prompted before posting then (setq org2blog/wp-confirm-post t). You will be prompted before every post.

Imagine though that for a personal blog where it is OK to make a lot of changes after posting you don’t need the prompt. Here you can override the global setting by setting the value directly in the individual blog configuration. It would look something like this

'("myblog"

:url "https://www.wisdomandwonder.com/xmlrpc.php"

:username username

:password password

:confirm t)

You probably noticed that the name of the global variable is a lot bigger than the name for configuring the individual blog. That is done in the interest of brevity. Also if you are overriding a global value then you already know a lot about it and don’t need to see it’s full name again.

Most variables are optional but there are two variables that must be configured within this system:

- Global org2blog-xmlrpc or blog specific :url

- Global org2blog-username or blog specific :username

An easy way to work with the difference between the global variable name and the blog specific name is to read the documentation for the global variable. It will show you the purpose of that setting, example values, and the property name if you want to use it in the blog specific configure. It is a very powerful and convenient feature that makes working with multiple blogs very easy and even fun.

Inserting Things

Most Org2Bloggers end up inserting a few elements common to all of us. The menu item UI [“Insert A”] captures some of them. You can get the help on them for more details and play around with inserting them too. You will be pretty surprised as how often you end up using them:

Confirming Things

Sometimes you want to be prompted before doing things. Here are some of the possibilities see:

- org2blog/wp-confirm-post

- org2blog/wp-safe-trash

- org2blog/wp-safe-new-entry-buffer-kill

- org2blog/wp-show-post-in-browser

HTML Support

Posting Exactly What You Wrote (Quoting HTML)

Sometimes you need to generate your HTML content by hand. For example you might be working with particular requirements for using a ShortCode. Another example is that you might be utilizing custom page elements that aren’t accessible any other way. Whatever the case you aren’t going to use the Org2Blog infrastructure to generate it: you need direct HTML access and here is how to get it by using Quoting HTML tags:

For a single line of code use this:

@@html:<b>@@bold text@@html:</b>@@

For multi-line code use this:

#+HTML: Literal HTML code for export

#+BEGIN_EXPORT html

All lines between these markers are exported literally

#+END_EXPORT

An easy way to create this style of source block is to use Structure Templates. Simply type <h then strike TAB to create an HTML export block.

(examples copied from the Quoting link)

Whatever you place in those blocks will get inserted directly into your post.

You will know when you need this feature and will greatly enjoy being able to use it.

Source Blocks

Org2Blog has first-class source block support. The headlines in this section explain how.

Org2Blog source blocks support both the #+name and #caption property.

Note:

- When you have and on a source block then the values are included in the post too.

Warning: Source blocks do not work inside of plain lists.

Out of the box source blocks are converted into <pre> tags. This is the most simple and durable approach: it is plain old HTML. And another option is to SyntaxHighlighter Evolved.

Here is how they look and work.

Plain Source Box Format

First make sure that Org2Blog will generate plain on <pre> tags like this:

(setq org2blog/wp-use-sourcecode-shortcode nil)

#+caption: My caption is my passport

#+name: Demo

#+BEGIN_SRC

(setq pass "Hi")

#+END_SRC

Here is how the built-in syntax highlighting looks:

/images/SourceBlockNormal3.png

SyntaxHighlighter Evolved

SyntaxHighlighter Evolved is an extremely popular plugin for rendering source code. It supports a bunch of languages and configuration parameters (see here) in addition to open-source custom plugins for other languages.

To use this first you need to set the variable org2blog/wp-use-sourcecode-shortcode to t.

Since you are an Emacser you probably want to add support for Emacs-Lisp immediately by using rehanift’s wp-syntaxhighlighter-brush-lispy. If you’ve never installed a plugin before then there are instructions on the page. The only thing that you might do differently is to create the folder wp-syntaxhighlighter-brush-lispy and copy the plugins files there.

Here are some examples of how to use SyntaxHighlighter Evolved:

(setq org2blog/wp-use-sourcecode-shortcode t)

Configure your source blocks for SyntaxHighlighter like this:

#+caption: My caption is my passport

#+name: Demo

#+BEGIN_SRC

(setq pass "Hi")

#+END_SRC

SyntaxHighlighter Evolved always uses the global configuration unless you override it with the line ~#+attr_wp: :syntaxhl light=”true”~ placed before the source block. The :syntaxhl property tells Org2Blog that everything following it is a configuration parameter for SyntaxHighlighter. Those values get passed on. The #+ATTR_WP line immediately must immediately precede the #+BEGIN_SRC line. It is easier though to configure it globally and never touch it again.

With SyntaxHighlighter Evolved enabled:

/images/SourceBlockSyntaxHighlighterExposed3.png

SyntaxHighlighter Evolved Is Broken Now What?!

Sometimes your source block contents cause this plugin to do the unexpected. It will look at best horrible and more likely just wrong. Then to put it simply your first reaction will be “Why doesn’t this workangry?!” For example, your source block may be rendered as plain text without any special formatting. If you run into this situation then start debugging it without Org2Blog even involved by editing the entry directly on WordPress.

For example remove all of the contents of the source block and type in a single word. Preview the page. It probably worked correctly so now paste in the first line of content that you removed just now. Keep repeating until it doesn’t work correctly anymore. If it looks like the problem is in Org2Blog then please create an issue ticket, otherwise considering reporting the issue to the plugin maintainer.

When you run into an issue and you want to just “make the content look right” then the easiest thing to do is to manually wrap it in an HTML <pre> block.

Here is how to do it:

#+begin_export html

<pre>

o0O s5S z2Z !|l1Iij {([|})] .,;: ``''"" www

a@#* vVuUwW <>;^°=-~ öÖüÜäÄßµ \/\/ -- == __

the quick brown fox jumps over the lazy dog

THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG

0123456789 &-+@ for (int i=0; i<=j; ++i) {}

</pre>

#+end_export

LaTeX Support

WordPress LaTeX

WordPress has LaTeX support built-in. org2blog/wp-use-wp-latex is enabled by default.

MathJax

MathJax is an open-source JavaScript display engine for LaTeX, MathML, and AsciiMath notation that works in all modern browsers.”

Whether you use MathJax with a WordPress plugin, manual inclusion, or any other means you need to be aware of MathJax’s CDN options: you need to get it from somewhere so just choose one of the sources and note the URL.

First tell Org2Blog to disable translation to wp-latex syntax because you want to use MathJax instead.

(setq org2blog/wp-use-wp-latex nil)

Then easiest way to use MathJax with WordPress is to set up this MathJax-LaTeX plugin.

- Steps

- Install it

- Configure it

- Force Load: NO

- Using MathJax adds time for loading your post. It is probably

imperceptible but you probably want page loads to be as fast as possible. If you plan to use MathJax a lot, or you don’t mind the nearly imperceptible load time even if you are not using it, then enable this setting: MathJax will get loaded on every post.

- If you are not going to use it frequently or want to manually require

it when you need it then use UI [“Insert A”] followed by UI [MathJax Shortcode] to insert the MathJax shortcode. When WordPress sees it, then MathJax will get loaded for the page.

- Default [latex] syntax attribute: Inline

- Use WP-Latex syntax? YES

- Use MathJax CDN Service? NO

- MathJax no longer hosts their own CDN but there are many alternatives.

- Custom MathJax location? YES

- This explains how to load and configure the library manually. Please

read it so you know what the plugin is doing.

- Copy the CDN URL up to and including the MathJax.js. Everything after

that are configuration options

- MathJax Configuration: TeX-AMS-MML_HTMLorMML

Now test your installation:

- Test it out using these (and more) examples

- The word LaTeX

- $\LaTeX$

- Inline

- $\sum_{i=0}^n i^2 = \frac{(n^2+n)(2n+1)}{6}$

- Equation

- $$\sum_{i=0}^n i^2 = \frac{(n^2+n)(2n+1)}{6}$$

You should see something like this:

MathJax Example

Migrating Org Mode Files To Org2Blog Files

If you want to turn an existing Org mode document into an Org2Blog document you only need to populate the required properties. Here is the easiest way how:

- Create a UI [New Buffer] or UI [New Subtree and copy those default property values

- Copy them into your file and populate them with what you want

- If you want to use this entry to provide content for an existing post on the server then populate POSTID. When you do this, and save or post your entry, whatever was on the server will get replaced.

That is the process to migrate a single Org file it is pretty simple. How do you migrating a lot lot more files though?

Fortunately it is still simple. Rather than performing the steps manually you can automate the process with code. The code will do what you did by hand instead of having to type it all yourself. First start by making sure that you are familiar with how to perform those steps manually.

First take a post and convert it by hand. It will prove to you that you understand the process, you can log into your blog, and that everything works correctly. That is all you need to begin automating.

Create another post and convert it by hand. This time use the API to submit it. Look at the code for org2blog--test-buffer-post to see how it works. That codes goes through all of the steps of posting including demonstrating how to make changes. You don’t need to do that for migration you. You only need to login and publish the post (if you want to see a result code, read the function doc). Now you are ready to begin automating migration of all of your Org files. When you have any questions please be sure to reach out here so your migration is as pleasant and fast as possible.

Export WordPress to Org

Once you start using Org2Blog for all of your new posts you you will want to starting using it for all of your old posts too. The easiest way for that is to export your WordPress database to Org files. This project performs that export. Reports of successful exports of 2000+ entries are common.

Using Entry Templates

Out of the box Org2Blog populates your new Buffer entries with a template. If you want to change it you can configure org2blog/wp-buffer-template or org2blog/wp-buffer-subtree-template-prefix.

The former takes some reading and study of the code to utilize. It will be simplified in a future release. The latter is a template that is inserted without any value substitution.

Tracking Entries

You can automatically track all of the posts that you make. Why might you want to do this?

Perhaps you want a logbook of when you actually posted your entries versus when you wrote them.

Maybe you want a single place to keep track of when you did all your posts so you can leverage Org mode’s feature to get an overview of how you’ve been posting in terms of volume or topics covered and use that information to decide how to move forward. Each scenario is pretty specific and it will probably be the same for you.

In my case sometimes I just want a record of what I did post so I can compare it to what is out on the server because sometimes I delete entries on the blog without deleting their source files in Org mode leaving me confused about what is going on.

Surely where are more examples than I could make up here. Please send me some scenarios that you use this feature. And speaking of that here is how to us this feature.

You need to tell Org2Blog where to do the tracking by telling it two things:

- What is the file name you want to store the tracking data in

- Under what headline do you want to store that data

Either specify at the top level programmatically:

(setq org2blog/wp-track-posts (list ".org2blog.org" "MYBLOGNAME"))

Or in your blog config

(let* ((credentials (auth-source-user-and-password "wisdomandwonder"))

(username (nth 0 credentials))

(password (nth 1 credentials))

(track-posts (list "org2blog.org" "MYBLOGNAME"))

(config `(("wisdomandwonder"

:url "https://www.wisdomandwonder.com/xmlrpc.php"

:username ,username

:password ,password

:track-posts ,track-posts

:confirm t))))

(setq org2blog/wp-blog-alist config))

when you post entries they will get logged in your log file under the headline specified. For example:

* MYBLOGNAME

** [[/Users/gcr/tmp/testpost.org][Hello, Buffer Post]]

:PROPERTIES:

:POSTID:   12578

:POST_DATE: 20190810T02:41:00+0000

:PUBLISHED: No

:END:

Hi.

If you specify a file that Org2Blog has some kind of problem accessing then it will try creating and loading the file specified by org-directory. That way you won’t lose anything. You can rename the file later after you get the desired file set working. The solution is usually to make sure that you specify the whole path ether absolutely or relatively. It won’t work right list a file name without it’s place in the directory system.

It it can’t do either then you will get a warning message saying why it failed. The solution is usually to correct the file name or set the org-directory to something valid.

Doing Things After Saving And Publishing

Now your post or page exists both in your Org-Mode file on your computer, and also in WordPress itself. That page or post inside of WordPress contains a lot of metadata and you might be interested in some of it. Here is documentation covering all of the fields. You can easily access that data using a hook function.

After publishing your post or page, Org2Blog calls the functions in org2blog/wp-after-new-post-or-page-functions passing them the post or page metadata. Maybe you’ve never seen a hook function like this before because it takes an argument. They are still just plain old functions. Here they need to accept one argument so that Org2Blog can give you that metadata. It is pretty simple.

Here is an example that displays your post or page information in the *Messages* buffer:

(add-hook 'org2blog/wp-after-new-post-or-page-functions (lambda (p) (pp p)))

The Huge Power Of Customizations

By now you’ve probably seen that Org2Blog can be tailored to your personal workflow. If you haven’t, the following will show you how easily that it can. If you already have, then you’ll see how you can make it even better. It all comes through Customization to your configuration.

The fastest way to learn about everything possible with Org2Blog is to read the documentation for the customizations. You’ve already seen some of them in examples and that is a great way to start learning about them. When you have a particular itch to scratch and you find answers in here, the support board, or function documentation they are all great ways to learn more. You can also benefit a lot from searching for all of the customization variables and reading the documentation for them. Here is how:

- Call M-x occur

- Insert (defcustom and hit enter

- A list of defcustom statements appears in your buffer

- Place the cursor on one and hit return

- You are now in a buffer with the cursor positioned at the source code of

that defcustom and ready to read its documentation

When you have time read one or two of them and see where they might fit into your workflow.

Some Questions And Some Answers

In some ways Org2Blog can be surprising. Since it bridges that gap between Org mode documents and WordPress blog posts sometimes there can be a little friction. That is where most of the questions come from in the form of something like “Why does Org2Blog …fill in the blank…? Because it is really weird!”. Be at ease though, this section should clear up some the weirdness ASAP.

Why Does Org2Blog Talk About Save, View, Publish, And Trash So Much?

Most software out there has some version of Create, read, update and delete (CRUD). In our case it has to do with WordPress Entries and Pages. In techie language you would talk about CRUD’ing them. In WordPress language you talk about Saving, Viewing, Publishing, and Trashing. Org2Blog chose to use the WordPress language: it is less surprising and makes it easier to keep the idea that Org2Blog fits into your WordPress workflow in your mind.

Take time to learn that workflow outside of Org2Blog. It will save you from uncomfortable situations where your entry enters a weird state. At least it can feel weird. For example when you make changes to an entry and save it, it will enter the Status of Draft. From here you only have two options to move it back to a Published state: Save the changes you made, or Save it without any changes. If you’ve never encountered this before it can be upsetting when the URL for your entry always says preview=true. Whenever you get into a confusing situation be sure to access your blog inside of the WordPress UI to find out more about what is happening. Usually it is something really simple. Then step back and see what Org2Blog is doing within the WordPress workflow.

Those words are also used because they reflect the natural workflow of working with WordPress that looks like this:

⮎Save → View → Publish⮌ Trash⁉

Blogging with WordPress is an iterative workflow, going through the cycle as many times as desired. Org2Blog supports and facilitates this workflow very well. This workflow is so important in fact that the entire right side of the main menu is dedicated to realizing it.

Why Does Org2blog Talk About Buffers, Subtrees, Posts, And Pages So Much?

WordPress doesn’t see much difference between a Post and a Page, so Org2Blog doesn’t either. Here is what I mean:

Blog is shorthand for Web Log. Every post you make on your blog is called an Entry. Org2Blog stores Entries in either a Buffer or a Subtree. Every Entry can be either a Post or a Page. This simplicity can actually lead to some less comfortable situations where you accidentally publish one thing as another (it is pretty easy to fix anyway though).

Although Org2Blog is implemented how WordPress works, it can surprising to see these words used. However you’ll get used to it pretty quickly.

Why Isn’t The Package Name Org2Wordpress?

When Org2Blog was created its technical name, its package name, was org2blog. Unbeknownst to us there was another package out there named Org2BlogAtom with the same package name!

These unforeseen naming conflicts do happen more than you might thing and it had to be resolved. Since they both had the same package name they needed some way to differentiate themselves from each other and the slash/suffix approach was chosen resulting in org2blog/atom and org2blog/wp. So why doesn’t this package say ‘Org2Blog/WP’ all over the place today?

That is another historical accident. This package became known simply as Org2Blog without the /WP, and the name stuck. Part of the reason might be that Org2BlogAtom seems unavailable and no longer maintained. Its wiki page hasn’t had any updates on the topic either. Having made this decision it made sense to change the artifact naming scheme to org2blog instead of org2blog/wp. It is easier to understand and adheres to artifact naming best practices. Over time existing /wp names are slowly being migrated. That still doesn’t answer the original question yet!

Org2Blog is blogging software. You write everything in Org mode and publish it to a blog. It is pretty simple. Currently it publishes to WordPress. Could it publish to any other blog? With some work definitely. Its impossible to rule out using Org2Blog to blog to other blogs in addition to WordPress.

In that historical context and considering goals today the name remains Org2Blog instead of Org2Wordpress.

What Is MetaWeblog And Why Is It In Org2Blog?

The MetaWeblog API is an application programming interface created by software developer Dave Winer that enables weblog entries to be written, edited, and deleted using web services.

Org2Blog implements a MetaWeblog client in metaWeblog.el. It has two uses.

First it implements an XML-RPC MetaWeblog client. This is generic and should work with any blog software that exposes the API.

Second it implements a WordPress API client.

Org2Blog uses this client to work with WordPress

metaweblog.el is provided a package from Org2Blog to make it reusable for others via the standard packaging system.

Why does Org2Blog Use Both The XML-RPC MetaWeblog and WordPress API

Both APIs are required to get the job done.

For historical reasons the WordPress API client is implemented inside of metaWeblog.

Sample Posts

There are so many ways to work with posts. Here are some real world examples to demonstrate how the features are implemented in a real entry.

Buffer Post

#+BLOG: wisdomandwonder

#+POSTID: 11659

#+ORG2BLOG:

#+DATE: [2019-02-01 Fri 19:38]

#+OPTIONS: toc:nil num:nil todo:nil pri:nil tags:nil ^:nil

#+CATEGORY: Emacs,

#+TAGS: MathJax, Org2Blog, Org mode, WordPress

#+TITLE: Blogging With Emacs🐃 From Org2Blog🦄 to WordPress

[mathjax]

Blogging from Org2Blog to WordPress /just works/ and that is just about all

there is to it. All of the markup works. Even MathJax works:

Subtree Post

* VIM Changes Acronym to "VIM Imitates eMacs"

:PROPERTIES:

:BLOG:     wisdomandwonder

:DATE: [2019-03-21 Thu 07:09]

:OPTIONS: toc:nil num:nil todo:nil pri:nil tags:nil ^:nil

:CATEGORY: Emacs,

:POST_TAGS: emacs

:ID:       o2b:3F021C4E-E80A-4DD4-AA13-A91835F0023D

:POST_DATE: [2019-03-21 Thu 07:26]

:POSTID:   12271

:END:

I ran ~M-x butterfly~ and we both smiled as VIM and Emacs converge.

Changelog

See HISTORY.

Credits

- This package was inspired by Ashish Shukla and created by Puneeth Chaganti.

- Cari at Sepia Rainbow Designs drew the brilliant logo.

- The Hundreds Of Org2Bloggers Out There.

- Be sure to add your or your friends or anybody’s blog to the list!

- Org2Blog is lovingly maintained by Grant Rettke.

When Things Go Wrong Or Could Go Even Better

When Things Go Wrong

Plan on staying positive even when things don’t go as planned!

It probably isn’t unique to you, and it is probably something easy to fix. Most surprises faced have to do with defects in the code, blog issues, and personal configurations. Together we will figure out what isn’t going quite right and make things right again.

Here is where to begin:

- Go here to search for the issue and maybe report it. Don’t hesitate because it is easier to close an already solved issue than go through the pain of trying to figure out a solved problem.

- Review the documentation by searching for keywords: it might be a documented feature.

- If you need to dig deeper read the documentation for org2blog-user-report. It walks you through the entire process of investigation. It can be intimidating at first. As you read through it though you will find that Org2Blog has a few clearly defined layers. When you “see” them they will make a lot of sense. Once you are comfortable with the ideas there, enable reporting with UI [Reporting On]

- Read about some past hard issues and how they were resolved.

When Things Could Go Even Better

Org2Blog always has room for new and improved features. The process for making those improvements is welcomed and simple.

Here are the steps:

- Ideas for new future features are captured in FUTURE file. Please read and review it to see if the feature is already listed in there.

- Review the already submitted entries to see if it is already in there. Typically ideas will either assigned for implementation or moved in the FUTURE file relatively quickly.

- If you don’t find it in either of those places then fill out a request here. Either way don’t worry too much about tracking down whether it was listed or not already: the most important thing is figuring out what to do with it next.

Development

- You may have already set up your codebase to run Org2Blog but if you haven’t then find out how up in the Installation section.

- Readme

- If you do decide make changes to the readme then you need to rebuild the table of contents. Install the package org-make-toc. Then call org-make-toc. You can also install it by hand like you did the other packages, like this:

cd ~/src

git clone https://github.com/magnars/s.el.git

git clone https://github.com/magnars/dash.el.git

git clone https://github.com/alphapapa/org-make-toc.git

Use this code to load it:

(add-to-list 'load-path "~/src/s")

(require 's)

(add-to-list 'load-path "~/src/dash")

(require 'dash)

(add-to-list 'load-path "~/src/org-make-toc")

(require 'org-make-toc)

- You may wish to automatically update the Readme’s table of contents by adding these file local variables to this file:

# eval: (require 'org-make-toc)

# before-save-hook: org-make-toc

- Contributing

- Read the contributing guidelines.

- Before your commit make sure that byte-compile-file, checkdoc, and package-lint-current-buffer don’t report any errors. The first two are included with Emacs. package-lint you can either install using MELPA or you can also install it by hand like you did the other packages, like this:

cd ~/src

git clone https://github.com/purcell/package-lint.git

Use this code to load it:

(add-to-list 'load-path "~/src/package-lint")

(require 'package-lint)

- Testing

- Programmatic Interactive System Testing

- Working with posts and pages is the most important 80% of this package. This core functionality should always work well and be easy to test. And it is easy to test. It only takes 3 steps to get the system tests running.

- Define 3 system variables for the blog you will test against like this:

O2BXMLRPC="https://yourblog.com/xmlrpc.php"

O2BUSER="user"

O2BPASSWORD="password"

- Load and evaluate System Test Program.

- Start Emacs in an empty environment before loading Org2Blog and performing the testing by starting Emacs like this: emacs --no-init-file

- Load (or open and evalute it) it because it is not a package.

- Now you’ve got everything you need to start automatically going through the entire blogging process. The test functions will log you in, create and display posts, modify them, publish them, and finally trash them. At each step there is a pause so you can observe what is happening on the blog. This is a great way to see how the workflow works too if you’ve never blogged before. These are the four functions that you will use for testing from a buffer or a subtree to a post or a page:

- defun org2blog--test-buffer-post

- defun org2blog--test-buffer-page

- defun org2blog--test-subtree-post

- defun org2blog--test-subtree-page

- If you need a test WordPress system to use you can set up a free WordPress blog here.

- Manual System Testing

- Here is a detailed Test Plan for manually testing every feature of this system. It is a great way to see everything that can be done with Org2Blog.

- Release Process.

- Rules

- Don’t Tread On Emacs.

- Code of Conduct.

License

- GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007.